Paradyne 6800 - Manual (Page 156)

COMSPHERE 6800 Series Network Management System
4-52 January 1997 6800-A2-GN22-30
Connecting Remotely
To connect a remote ANALYSIS NMS to the host processor, you will need the following
materials:
•
035-0153-0031 cable
•
002-0039-0031 connector
•
Two DCE devices with the following characteristics:
— Asynchronous transmission
— Full-duplex operation
— Flow control ON
— Bit rates of 1200, 2400, 4800, or 9600 bps
•
835-5783-0011 cable (for ANALYSIS 6510/5605)
•
835-4613-2511 cable and 002-0019-0031 connector (for ANALYSIS 5600)
Figure 4-26 illustrates a remote connection for both the ANALYSIS 6510/5605 and ANALYSIS
5600 NMS. The following sections explain how to connect both systems remotely.
Figure 4-26. ANALYSIS 6510/5605 and 5600 Remote Connection