Paradyne 6800 - Manual (Page 87)

COMSPHERE 6800 Series Network Management System
3-6 January 1997 6800-A2-GN22-30
Figure 3-3. DL3400 — SETUP Mode Opening Menu
4. To print the first setting, press the FF button. To print each additional setting, press the FF
button repeatedly. Each time you press the button, an additional setting will be printed.
Print all 22 settings and compare the values with the values shown below. If any of the
values on the printer do not match, change them accordingly. The following explains how
to do this:
a. The value that is underlined is the default. To change the default, press the MODE
button until the cursor is positioned on the value you want to replace the default.
b. Press the LF button to select that value. The printer will draw a line under the value,
indicating selection, and move the cursor to the next setting.
c. Repeat this procedure for each setting that needs to be changed.