Paradyne 6800 - Manual (Page 270)

System Start-Up and Shutdown
6-9 6800-A2-GN22-30 January 1997
3. To select Start the system,
TYPE: 1
PRESS: Enter
The following message displays:
The [UIP] start facility has been successfully added to the system. The [UIP] will be
started automatically, please wait...
Although the UIP is active, it only becomes functional if the NMS host is active. If the
host is not active, the UIP will wait until the NMS host becomes active.
The following message displays:
Press RETURN to continue
PRESS: Enter
4. The Network Management System Menu displays. At this point the UIP is active and
functional if the NMS host is active (up and running).
TYPE: 5
PRESS: Enter
to select Return to Console Login.
5. At the login prompt,
TYPE: ffw
PRESS: Enter
The system prompts for password.
TYPE: the full-feature workstation password
PRESS: Enter
The welcome message appears followed by the FFW Login window (see Figure 6-2).
Shutting Down the UIP Application Program
To shut down the UIP application program, perform the following steps:
1. The Network Management System Menu displays. To begin shutdown, select Stop the
system.
TYPE: 2
PRESS: Enter
2. The following message displays:
There are [UIP] processes running,
The processes will be shut down please wait...
The [UIP] facility has been removed.