Paradyne 6800 User Manual
Page 79
COMSPHERE 6800 Series Network Management System
2-56
January 1997
6800-A2-GN22-30
The Customer Test main menu appears.
11. Use the
↓
key to highlight Disk Utilities.
PRESS: Enter
The Disk Utility Menu appears.
A table is displayed indicating the physical characteristics of the disk. The disk utility
program is automatically run measuring the characteristics of the disk drive. As each
option is measured it turns from blue to yellow.
12. Use the
↓
key to highlight Low Level Format.
PRESS: Enter
The Low Level Format option may be hidden. If it is shown, use the
↓
key to highlight it
and
PRESS: Enter
If it is not shown,
PRESS: Ctrl + Alt + f
to redraw the menu with the Low Level Format option, and then use the
↓
key to select it.
The Low-Level Format screen appears and displays the following message:
!!!WARNING!!! DESTRUCTIVE HARD DISK
Tests specified: Data will be DESTROYED
on HARD DISK #1. Press
continue. Press [ESC] to abort.
13. To prepare the hard disk for full-feature workstation use,
PRESS: Alt + F5
NOTE
The cylinder fields should be incrementing at one cylinder per
second. The entire format operation should take about 20 minutes.
14. When the formatting is complete,
PRESS: Esc
to return to the original Customer Test main menu.
15. Use the
↓
key to highlight Exit The Program.
A window displays the message:
Want to QUIT?
Remove the Customer Test disk and select Yes.