Paradyne 6800 - Manual (Page 84)

Preparing the Printers
3-3 6800-A2-GN22-30 January 1997
QUALITY :LETTER
FONT :COMPRSD
CHAR-W :NORMAL
CHAR-H :NORMAL
CHAR SP :10 CPI
LINE SP :6 LPI
EMULATE :DPL24C
ATTRIB :NONE
PAGE LG :11.0 IN
COLOR :BLACK
LFT-END :1 COLM
TOP-MRG :1 LINE
LANGUGE :USA
CHR-SET :SET 1
GRPH-LF :IBM-GPH
PRF-SKP :NO-SKIP
WIDTH :13.6 IN
ZEROFNT :NO-SLSH
DC3-CDE :ENABLE
CR-CODE :CR ONLY
LF-CODE :LF & CR
RGHTEND :WRAP
4. To show the first setting in the display area, press the LF button. To show each additional
setting, press the LF button repeatedly. Each time you press the button, an additional
setting will appear in the display area. Scroll through all 22 settings and compare the values
with the values shown above. If any of the values on the printer do not match these values,
change them accordingly. The following explains how to do this:
a. Press the LF button until the setting you want to change is shown in the display area.
b. Press the RESET button to display the first value that is valid for this setting. Press
RESET repeatedly to display each additional valid value. The value that is asterisked
is the one currently selected.
c. When the value you want is displayed, press LF to select that value and return you to
the MENU1 function.