Paradyne 6800 - Manual (Page 151)

Connecting the Components
4-47 6800-A2-GN22-30 January 1997
To establish the file export connection that will provide device profile, site profile and facility
profile information, perform the following steps:
1. Connect the grounded end of the 035-0153-0031 cable to the IPC-1600 port that is
configured for file export.
2. Connect the other end of the 035-0153-0031 cable to the 002-0040-0031 connector.
3. Connect the 002-0040-0031 connector to the appropriate port on the ACCUMASTER
Integrator.
To establish the UAI connection that will transmit alarms, perform the following steps:
1. Connect the grounded end of the 035-0153-0031 cable to the IPC-1600 port that is
configured for UAI.
2. Connect the other end of the 035-0153-0031 cable to the 002-0040-0031 connector.
3. Connect the 002-0040-0031 connector to the appropriate port on the ACCUMASTER
Integrator.
To establish the ACCUMASTER cut-through connection that is used by the Integrator operator to
cut through to the 6800 Series NMS, perform the following steps:
1. Connect the grounded end of the 035-0153-0031 cable to the IPC-1600 port that is
configured as a remote terminal.
2. Connect the other end of the 035-0153-0031 cable to the 002-0040-0031 connector.
3. Connect the 002-0040-0031 connector to the appropriate port on the ACCUMASTER
Integrator.