Paradyne 6800 - Manual (Page 155)

Connecting the Components
4-51 6800-A2-GN22-30 January 1997
Figure 4-25. ANALYSIS 6510/5605 AND 5600 Local Connection
Connecting the ANALYSIS 6510/5605
To connect a local ANALYSIS 6510/5605 to the host processor, perform the following steps:
1. Connect the grounded end of the 035-0153-0031 cable to a port on the IPC-900 card.
2. Connect the other end of the 035-0153-0031 cable to the 002-0040-0031 connector.
3. Connect the 002-0040-0031 connector to Port 1 on the ANALYSIS 6510/5605.
Connecting the ANALYSIS 5600
To connect a local ANALYSIS 5600 to the host processor, perform the following steps:
1. Connect the grounded end of the 035-0153-0031 cable to a port on the IPC-900 card.
2. Connect the other end of the 035-0153-0031 cable to the 002-0053-0031 connector.
3. Connect the 002-0053-0031 connector to Port 1 on the ANALYSIS 5600.