Paradyne 6800 - Manual (Page 327)

A-1 6800-A2-GN22-30 January 1997
Modem Settings
Overview A-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3810, 3811, and 3820 Modems A-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2224-CEO Modem A-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Configuring 3810, 3811, and 3820 Modems A-1 . . . . . . . . . . . . . . . . . . . . . . . . .
Hardware Option Settings for the 2224-CEO A-2 . . . . . . . . . . . . . . . . . . . . . . . . .
Software Configuration Option Parameters for the 2224-CEO A-3 . . . . . . . . . . .
Locking Option Changes A-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Overview
3810, 3811, and 3820 Modems
The 3810, 3811, and 3820 modems provide a user friendly diagnostic control panel (DCP) for
configuration. Please see the section Configuring 3810 Modems in this appendix to configure these
modems.
2224-CEO Modem
The 2224-CEO modem has both hardware option switches and software configuration option
parameters that control its operation. This appendix describes the recommended settings for both
hardware and software options.
Use this information as general guidelines. Different values are possible, and other modems may
be used.
Configuring 3810, 3811, and 3820 Modems
To configure 3810, 3811, and 3820 modems, perform the following steps at both the host and
remote ends of the modem pair.
1. Select Configure from DCP using the right arrow key.
2. Select Factory using the right arrow key.
3. If the modem is used for ATR, select UNIX dial using the right arrow key. If the modem is
used for remote workstation access, select Async dial using the right arrow key.
4. Select Edit (F1).
A