Paradyne 6800 - Manual (Page 283)

COMSPHERE 6800 Series Network Management System
7-12 January 1997 6800-A2-GN22-30
17. Remove the backup cartridge tape, label it, and store it in a secure place. To continue,
TYPE: ready
PRESS: Enter
As the migration process proceeds, the system displays status messages at various stages
reporting the progress of the migration to that point.
18. You will now be queried for 741 multiplexer node numbers as follows:
In order to migrate the Multiplexer device profiles
accurately, please provide the node numbers for all 741 Multiplexers.
Please enter a node number or ‘‘done’’ to end the list:
19. List all 741 multiplexer node numbers supported by the NMS and
PRESS: Enter
after each one. When the list is complete (or if there are none),
TYPE: done
PRESS: Enter
After migration completes, the following message appears:
Now rebuild the NMS database indices.
20. When the pound sign (#) prompt appears,
TYPE: exit
PRESS: Enter
to return to the Console Login: prompt.
21. At the Console Login: prompt,
TYPE: nms
PRESS: Enter
TYPE: The nms password (the default is startmenu)
PRESS: Enter
The Release 4.2 6800 Series NMS menu appears.
22. To continue,
TYPE: 1
PRESS: Enter
to select Start the System.
The following message appears:
Starting the AT&T Paradyne NMS system. Please wait...