Paradyne 6800 - Manual (Page 44)

Preparing the Processors
2-21 6800-A2-GN22-30 January 1997
Figure 2-13. IPC-1600 Ports Cabinet Assembly
Altos System 5000 UIP
The Altos 5000 User Interface Processor (UIP) can connect to either an Altos 5000 or 15000 host.
The UIP memory configurations are different depending on which is the host processor (see
Table 2-4). The Altos 5000 UIP can be configured with an IPC-1600 Serial Ports card and/or a
Proteon P1990plus Token Ring Network Interface Card. The Token Ring card is optional and
replaces the Integral Ethernet card on the Altos 5000 UIP. The IPC-1600 Serial Ports card is
conditionally optional. That is, it is required on the first UIP of an Altos 15000 NMS but is
optional on an Altos 5000 NMS.
Circuit Cards
Table 2-3 shows the location of the standard and optional circuit cards when installed in the Altos
System 5000 UIP.