Paradyne 6800 - Manual (Page 205)

COMSPHERE 6800 Series Network Management System
5-44 January 1997 6800-A2-GN22-30
8. Once the correct serial number and activation key are entered, the system completes the
base UNIX installation and displays the following message:
Please assign a password for super-user account, “root”
You can choose whether you pick a password or have the system create
one for you:
1. Pick a password
2. Pronounceable password will be created for you
Enter choice (default is 1):
TYPE: 1
PRESS: Enter
9. The system prompts:
New password:
TYPE: your chosen password
PRESS: Enter
The system prompts:
Re-enter new password:
TYPE: your chosen password again
PRESS: Enter
The system displays several status messages followed by:
Installation and configuration of the Altos/SCO UNIX System V Operating System is
now complete. Remove the filesystem (Volume 2) floppy and the cartridge tape
(Volume 3) after the system is shutdown and press to restart the system.
** Safe to Power Off **
-or
** Press Any Key to Reboot **
CAUTION
Do not remove the boot floppy or tape until the Press Any Key
to Reboot prompt is displayed.
Remove both the floppy disk and the cartridge tape.
PRESS: any key
to reboot the system. The system auto-boots; do not press the spacebar to interrupt
auto-boot. The following prompt appears:
Boot
:
PRESS: Enter