Paradyne 6800 - Manual (Page 229)

COMSPHERE 6800 Series Network Management System
5-68 January 1997 6800-A2-GN22-30
Create a HOSTS file that has the same name as the one you specified, before you start
X-One.
See the Installation & Operation Guide for more details
X-One Install Complete
Press any key to continue ...
PRESS: Enter
Installing the NMS Full-Feature Workstation Application Software with EtherLink II Card
A special program is provided to help you install the full-feature workstation application software
on your Altos 486DX/33, Altos SX/20 or a 386-based processor. To install the software, perform
the following steps:
1. Turn on your system. Insert your working copy of the disk labeled 6800 FFW Application
Volume 1 into Drive A.
2. At the C> prompt,
TYPE: cd C:\/XONE
PRESS: Enter
TYPE: a:install
PRESS: Enter
The current directory should be “\XONE”
If current directory is not “\XONE”
Please break out of the installation by typing
Ctrl-C
Press any key to continue
PRESS: Enter
3. The system displays many messages including the following significant ones:
Loading fonts
Loading configuration script
Loading packet driver
For further information on installation and startup -
Please refer to the C:\/XONE\/README file.
Installation Completed.
4. Determine if the workstation connects to the host or a UIP (either uip-1 or uip-2).