Network connections, Etwork, Onnections – Promise Technology 2-Year Extended Warranty for VessR2000 RAID Head User Manual
Page 665: Mgmt

638
Vess
R2000
Series
Product
Manual
Promise
Technologies
n
etwOrk
c
OnnectiOns
Each RAID controller has an Ethernet (RJ45) management port connector on the back of the enclosure. This is
a 100 Mbps Ethernet connector designed to connect to your network. The Vess becomes a node on your network
like any other PC, server or other component with an IP address.
Vess ships from the factory IP addresses of 10.0.0.1, 10.0.0.2, and 10.0.0.3. You must change these addresses
to ones that work on your network. You make the initial IP address setting using the CLI. See “Making a Serial
Connection” on page 298 and “Setting-up the Serial Connection” on page 66.
Management Port LEDs
State
Activity
Connectivity
Dark
No activity
10BaseT
Steady green
—
100BaseT
Flashing green
Activity
—
Mgmt
Activity LED
Connectivity LED
Management port connection on the RAID controller