Promise Technology 2-Year Extended Warranty for VessR2000 RAID Head - Manual (Page 470)

443
Product Manual Manage with CLU
Step 2 – Logical Drive Creation
1. If you want to specify an alias to the logical drive, highlight Alias and type a name.
Maximum of 32 characters. Use letters, numbers, space between words and underscore.
2. Highlight RAID Level and press the spacebar to toggle though a list of available RAID levels.
3. If you want to create multiple logical drives, highlight Capacity , press the backspace key to remove the
current value, then type a new smaller value.
4. RAID 30, 50 and 60 only. Highlight N umber of Axles and press the spacebar to choose the number of
axles.
See " RAID 60 Axles " and " RAID 50 Axles ".
5. For the following items, accept the default value or highlight and press the spacebar to choose a new
value:
• Highlight Stripe and press the spacebar to toggle through stripe
sizes and choose 64 KB, 128 KB, 256 KB, 512 KB, or 1 MB.
• Highlight Sector and press the spacebar to toggle through
sector sizes and choose 512 B, 1 KB, 2 KB, or 4 KB.
• Highlight W rite Policy and press the spacebar to toggle write cache
policy between WriteBack and WriteThru (write though).
• Highlight R ead Policy and press the spacebar to toggle read cache
policy though ReadCache , ReadAhead , and NoCache .
• Highlight P referred Controller ID and press the spacebar
to toggle among 1 , 2 , or Automatic .
• Highlight PerfectRebuild and press the spacebar to toggle Enable or disable.
6. Highlight Save Logical Drive and press Enter .