Promise Technology 2-Year Extended Warranty for VessR2000 RAID Head - Manual (Page 106)

M
Aking
M
AintenAnce
M
Ode
s
ettings
– M
AnuAlly under
iP
v
6 (cli)
You make these settings for one controller at a time.
To make maintenance mode settings:
1. At the command prompt, type net -a enable -f ipv6 -m -c 1 and press Enter to enable IPv6.
After a moment, the comand prompt reappears, indicating that your setting was successful.
administrator@cli>
2. At the command prompt, type net -a mod -m -c 1 -s “ followed by:
• primaryip= and the IP address ,
• primaryipmask= and the subnet mask ,
• primarydns= and the DNS server IP address ,
• gateway= and the Gateway server IP address
“ and press Enter.
Example:
administrator@cli> iscsi -a mod -t portal -s
“primaryip=2001:0db8:85a3:0000:0000:8a2e:0370:7336, primaryip
mask=2001:0db8:fedc:ba98:7654:3210:0246:8acf,
primarydns=2001:0db8:85a3:0000:0000:8a2e:0370:7001,
gateway=2001:0db8:85a3:0000:0000:8a2e:0370:7002”
After a moment, the comand prompt reappears, indicating that your setting was successful.
administrator@cli>
79
Product Manual Setup