Promise Technology 2-Year Extended Warranty for VessR2000 RAID Head - Manual (Page 104)

M
Aking
M
AintenAnce
M
Ode
s
ettings
– M
AnuAlly under
iP
v
4 (cli)
You make these settings for one controller at a time.
To make maintenance mode settings:
1. At the command prompt, type net -a mod -m -c 1 -s “ followed by:
• primaryip= and the IP address ,
• primaryipmask= and the subnet mask ,
• primarydns= and the DNS server IP address ,
• gateway= and the Gateway server IP address
“ and press Enter.
Example:
administrator@cli> net -a mod -m -c 1 “primaryip=10.0.0.101,
primaryipmask=255.255.255.0,primarydns=10.0.0.11,gatew
ay=10.0.0.1”
After a moment, the comand prompt reappears, indicating that your setting was successful.
administrator@cli>
2. To verify the settings changes, at the command prompt, type net -a list -m and press Enter.
77
Product Manual Setup