Viewing battery information (clu), Battery notes, Iewing – Promise Technology 2-Year Extended Warranty for VessR2000 RAID Head User Manual
Page 457: Attery, Nformation, Clu), Otes
430
Vess R2000 Series Product Manual
Promise Technologies
V
iewiNg
b
attery
i
NForMatioN
(Clu)
This feature enables you monitor and recondition the subsystem battery or batteries.
1. From the Main Menu, highlight
Subsystem Management
and press
Enter
.
2. Highlight
Enclosure Management
and press
Enter
.
3. Highlight the enclosure you want and press
Enter
.
4. Highlight
Batteries
and press
Enter
.
5. Highlight the battery you want to monitor and press
Enter
.
b
Attery
n
Otes
If a battery does not reflect normal conditions and it is not currently under reconditioning, run the Recondition
function before you replace the battery. See Reconditioning a Battery (CLU).
Reconditioning fully discharges, then fully recharges the battery. During reconditioning, if the Adaptive Writeback
Cache function is enabled, the controller cache is set to
Write Thru
. After reconditioning, the cache is reset to
Wr
ite Back. See “Making Controller Settings (CLU)” on page 422.
If a battery reaches the threshold temperature while charging or discharging, the charge or discharge pauses
and the blower runs at high speed until the battery temperature falls below the threshold.
If the battery does not maintain normal values after a Recondition, replace the battery. See “Replacing a Cache