Promise Technology 2-Year Extended Warranty for VessR2000 RAID Head - Manual (Page 161)

134
Vess R2000 Series Product Manual Promise Technologies
M
AnAgIng
n
etwoRk
c
onnectIonS
Network Connections Management includes the following functions:
• “Making Virtual Management Port Settings” on page 134
• “Making Maintenance Mode Settings” on page 135
M
akiNg
V
irtual
M
aNageMeNt
p
ort
s
ettiNgs
The Vess R2600 subsystem has a virtual management port, enabling you to log into a Vess R2600 with dual
controllers using one IP address.
Before you change settings, please See “About IP Addresses” on page 36.
You initially made these settings during subsystem setup. You can change them later as required.
Caution
Changing virtual management port settings can interrupt your
WebPAM PROe connection and require you to log in again.
To make virtual management port settings:
1. Click the Administration tab.
2. Click the Network Management icon.
3. Click the Virtual Management Port tab.
4. Click the protocol family whose settings you want to change and click the Configuration button.
5. Make the following settings are needed:
• Check the E nable box to enable this protocol family.
• Check the E nable DHCP box to enable a DHCP server to make your
network settings. DHCP is currently supported in IPv4 only.
• For manual network settings, type the RAID subsystem’s IP address, subnet mask,
gateway IP address, and DNS server IP address into the fields provided.
6. Click the Submit button.