Promise Technology 2-Year Extended Warranty for VessR2000 RAID Head - Manual (Page 446)

419
Product Manual Manage with CLU
M
akiNg
Ntp s
ettiNgs
(Clu)
After you have made Network Time Protocol (NTP) settings, the Vess R2000 subsystem synchronizes with a
NTP server.
• At startup
• Every night
• When you synchronize manually
To make NTP settings for the subsystem:
1. From the Main Menu, highlight Subsystem Management and press Enter .
2. Highlight NTP Management and press Enter .
3. Highlight NTP Settings and press Enter .
4. Make the following settings as required:
• Highlight NTP Service and press the spacebar to toggle between Enabled and Disabled .
• Highlight Time Server (1) , Time Server (2) , or Time Server (3) and type a server name.
Example: 0.us.pool.ntp.org
You can have up to 3 NTP servers.
• Highlight Time Zone and press the spacebar to toggle through GMT, GMT+, and GMT-.
For GMT+ and GMT-, type the hour from 0:00 to 13:00 GMT for your time zone.
• Highlight Daylight Savings Time and press the spacebar
to toggle between Enable and Disable .
If Daylight Savings Time is Enabled, highlight the Start Month and End Month and enter
a number from 1 to 12.
Then highlight the
Week and Day and toggle to make your choices.
5. Press Control-A to save your settings.
Notes
The NTP server name shown is an example only. You must find and enter your local NTP server
name.
GMT is the older designation for UTC.