Promise Technology 2-Year Extended Warranty for VessR2000 RAID Head - Manual (Page 327)

300
Vess R2000 Series Product Manual Promise Technologies
t
ABle of
S
uPPoRteD
c
oMMAnDS
The table below and on the following pages provides a brief description of the CLI commands
available on the Vess R2000 Series.
Command Action
menu Use to switch interface to CLU.
help
When used alone will display this menu. When used in conjunction with
a command (example: help array) it will display help information for that
particular command.
?
This can be used in place of the help command or optionally can be used as
a switch for a command (example: array -?) to provide command usage.
about View utility information.
array
View or edit array information. Create, edit, or delete logical drives in an
existing array. To physically locate an array in an enclosure. Accept an
incomplete array condition.
assn View, create, or delete associations between logical drives.
battery View battery information or to recondition a battery.
bbm View or clear the BBM defect list of the specified configured physical drive.
bga
View status of all current background activities. Enable or disable relevant
background activities. Modify the background task rate for each of the
background tasks.
bgasched View, add, modify or delete bga scheduled background activities.
buzz View buzzer status, enable/disable and turn on/off buzzer.
checktable View logical drive error tables.
chap
Add, modify or delete a CHAP record for authentication of iSCSI host
interface.
clone View logical drive clone status and progress. Start, stop a clone.
config
For express or automatic configuration.
For advanced configuration please see the ‘array’ command.
ctrl View or edit controller information and settings.
Note : Commands are NOT case sensitive.