Promise Technology 2-Year Extended Warranty for VessR2000 RAID Head - Manual (Page 160)

133
Product Manual WebPAM PROe - System Configuration
V
iewiNg
ups i
NForMatioN
To view information about a specific UPS unit:
1. Click the Device tab.
2. Click the UPS icon.
3. Mouse-over UPS and click the View button.
UPS information includes:
• UPS ID
• Model Name
• Serial Number
• Firmware Version
• Manufacture Date
• Voltage Rating – Output voltage of the UPS.
• Battery Capacity – Backup capacity expressed as a percentage.
• Remaining Backup Time – Number of minutes the UPS is expected
to power your system in the event of a power failure.
• Loading Ratio – Actual output of UPS as a percentage
of the rated output. See the Note below.
• Temperature – Reported temperature of the UPS unit.
Note
The maximum recommended Loading Ratio varies among models of UPS units.
The general range is 60% to 80%. If the reported Loading Ratio exceeds the
recommended value for your UPS unit:
Have fewer subsystems or peripherals connected to this UPS unit.
Add more UPS units, or use a higher-capacity UPS unit, to protect your RAID
systems.