Promise Technology 2-Year Extended Warranty for VessR2000 RAID Head - Manual (Page 192)

165
Product Manual WebPAM PROe - System Configuration
M
Aking
snMP s
ettings
To change SNMP service settings:
1. Click the Administration tab.
2. Click the Services icon.
3. Click the SNMP service and click the Settings button.
4. Make settings changes as required:
• Choose a startup type,
Automatic – (default) Starts and runs with the subsystem.
Manual – You start the service when you need it.
• Port Number – Default is 161.
• System Name – No default.
• System Location – Default is USA.
• System Contact – Default is [email protected].
• Read Community – Default is public.
• Write Community – Default is private. No changes are possible.
5. Click the Save button.
6. Click the Confirm button.
A
dding An
snMP t
rAP
s
ink
To add a trap sink:
1. Click the Administration tab.
2. Click the Services icon.
3. Click SNMP service and click the Settings button.
4. Enter a trap sink server IP address in the field provided.
5. Choose a trap filter (event severity level). See “Event Severity Levels” on page 169.
6. Click the Add button.
7. Click the Confirm button.