Telnet connection – Promise Technology 2-Year Extended Warranty for VessR2000 RAID Head User Manual
Page 656

629
Product Manual
6.
At the
MAINTENANCE MODE@cli>
prompt, type maintenance -a exit and press
Enter
.
The controller reboots. The login screen again appears.
7. Close the Serial connection.
Telnet Connection
This procedure requires you to know the IP address of the controller.
To clear maintenance mode using a Telnet connection:
1. Go to the command line prompt (Windows) or click the terminal icon (Linux), then run:
telnet 192.168.1.56 2300
The IP address above is only an example. 2300 is the default Telnet port for Vess.
The login screen appears.
The following steps show the default Administrator user name and pass-word. Use your own user name and
password if you have changed these.
2. At the Login prompt, type
administrator
and press
Enter
.
3. At the Password prompt, type
password
and press
Enter
.
The CLI screen appears.
The prompt should display
MAINTENANCE MODE@cli>
. If the prompt dis-plays your login name, such as
administrator@cli>
, log into the other controller.
4.
At the
MAINTENANCE MODE@cli>
prompt, type maintenance -a exit and press
Enter
.
The controller reboots. The Telnet session ends.