Promise Technology 2-Year Extended Warranty for VessR2000 RAID Head - Manual (Page 488)

461
Product Manual Manage with CLU
Note
You can add physical drives to a RAID 50 or 60 array but you cannot change
the number of axles.
If you add an odd number of physical drives to a RAID 10 array, it becomes a
RAID 1E array by default.
6. Highlight Save Settings and Continue and press Enter .
7. Highlight a logical drive in the list that you want to migrate and press Enter .
8. Highlight RAID Level and press the spacebar to toggle through the available RAID levels.
9. Optional. If you want to increase capacity of the logical drive, highlight Expand Capacity and press the
spacebar to toggle to Yes .
Highlight Capacity , press the backspace key to erase the current capacity and type in the new value.
The new value must be equal or larger than the current capacity.
10. Highlight Save Logical Drive and press Enter .
The screen returns to Disk Array Migration Logical Drives.
At this point, if you have other logical drives in the same disk array, you can choose them for migration at
the same time.
11. Highlight Complete Disk Array Migration and press Enter .
12. Press Y to confirm.
The screen returns to Disk Arrays Summary.
For migration rate, see “Making Background Activity Settings” on page 494.