Promise Technology 2-Year Extended Warranty for VessR2000 RAID Head - Manual (Page 213)

186
Vess R2000 Series Product Manual Promise Technologies
C
leariNg a
s
tale or a
pFa C
oNditioN
This procedure is used to clear configuration data on a physical drive; or if the physical drive is stale or the has
errors putting it in PFA status.
Stale – The physical drive contains obsolete disk array information.
PFA – The physical drive has errors resulting in a prediction of failure.
Be sure you have corrected the condition by a physical drive replacement, rebuild operation, etc., first. Then
clear the condition.
To clear a Stale or a PFA condition:
1. Click the Device tab.
2. Click the Physical Drive icon.
3. Click the physical drive you want, then click the Clear button.
If the physical drive has both a Stale condition and a PFA condition, the first click removes the Stale
condition. Click the Clear button a second time to remove the PFA condition.
u
pdatiNg
F
irMware oN a
p
hysiCal
d
riVe
This feature applies only to PROMISE-supported physical drives. For a list of supported drives, go to
http://www.promise.com/support/.
If you have physical drives in your RAID system that are not PROMISE-supported, follow the firmware update
procedure from the drive manufacturer.