Promise Technology 2-Year Extended Warranty for VessR2000 RAID Head - Manual (Page 430)

403
Product Manual Managing with the CLI
ups
Usage
ups [-a ]
ups -a list [-v]
ups -a mod -s “”
Summary
The ups command allows a user to view and modify ups status and settings. Network UPS
is supported for IPv4 protocol only.
Options
-a Which action to perform.
list (Default) Displays all current UPS status.
mod Change the settings for UPS.
-s “=” Used to specify what options to change.
detection= Detection mode setting
auto (Default. Whenever a UPS is detected, it changes the detection
mode to “enable”.)
enable (Monitors UPS, UPS Settings changes, reports warnings and logs
events.)
disable (Monitors Serial UPS only.)
ups1= UPS1 IP address or Domain Name.
ups2= UPS2 IP address or Domain Name.
rtr= Running time remaining threshold in minute. The valid value range
is 3~20.
lr= Critical loading ratio threshold in percentage The valid value range
is 1~100.