Promise Technology 2-Year Extended Warranty for VessR2000 RAID Head - Manual (Page 266)

239
Product Manual WebPAM PROe - System Configuration
V
iewiNg i
sCsi p
ort
i
NForMatioN
To view information about a port:
1. Click the Device tab.
2. Click the IO Network Management icon.
3. Click the Port tab.
4. Click the port you want, then click the View button.
Port information includes:
• Controller ID – ID of the RAID controller where the port is located
• Status – Enabled or disabled
• Jumbo Frames – Enabled or disabled*
• Link Status – Up or down, active or inactive
• MAC Address – MAC address of the target port
• Maximum Supported Speed – Maximum speed supported (1 Gb/s or 10 Gb/s)
• Current Speed – Current or actual speed of the target port
• Relative Portals – The portals corresponding to this target port
Items marked with an asterisk (*) are adjustable under "Making iSCSI Port Settings"
M
akiNg i
sCsi p
ort
s
ettiNgs
To make iSCSI port settings:
1. Click the Device tab.
2. Click the IO Network Management icon.
3. Click the Port tab.
4. Click the port you want, then click the Settings button.
5. Make settings changes as required:
• Jumbo Frames – Check to enable jumbo frame support on this port. Uncheck to disable.
6. Click the Submit button.