Promise Technology 2-Year Extended Warranty for VessR2000 RAID Head - Manual (Page 637)

610
Vess R2000 Series Product Manual Promise Technologies
LED Description
FC ports
(one LED above
each port)
Green Amber Status
dark dark Wake-up failure (dead board)
off on POST failure (dead board)
off blinking slowly Wake-up failure monitor
off blinking rapidly Failure to POST
off flashing POST in progress
on off Failure while functioning
on on Failure while functioning
on 2 rapid blinks Normal, link up, 2 Gb/s
on 3 rapid blinks Normal, link up, 4 Gb/s
on 4 rapid blinks Normal, link up, 8 Gb/s
blinking slowly off Normal, link down
blinking slowly blinking slowly Off offline for download
blinking slowly blinking rapidly
Restricted offline mode (waiting
for restart)
blinking slowly flashing
Restricted offline mode, test
active
Fibre Channel port LED behavior
1G iSCSI
Link/Act and
Speed
Two LEDs are located above each port. The left LED lights GREEN when
connected, flashes GREEN when there is activity on the port and remains
dark no connection has been established. The LED on the right of each port
indicates connection speed, GREEN is 100 Mbps, AMBER is 1000 Mbps.
10G iSCSI
(Vess R2600ti)
Link/Act and
Speed
Two LEDs are located above each port. The left LED lights GREEN when
connected, flashes GREEN when there is activity on the port and remains
dark no connection has been established. The LED on the right of each port
indicates connection speed, AMBER is 1000 Mbps, GREEN is 10000 Mbps.
Note that the 10G port speed LED indicator is different than the 1G ports, a GREEN
speed LED is the fastest speed on the 10G port, in contrast to the 1G iSCSI I/O
ports where GREEN is the slowest speed. AMBER indicates 1000 Mbps on both
port types.
iSCSI port LED behavior