Managing the network connection (clu), Making virtual management port settings (clu), Making automatic settings – Promise Technology 2-Year Extended Warranty for VessR2000 RAID Head User Manual
Page 491: Anaging, Etwork, Onnection, Clu), Aking, Irtual, Anagement

464
Vess R2000 Series Product Manual
Promise Technologies
M
AnAgIng
the
n
etwoRk
c
onnectIon
(clu)
Network Management deals with network connections and settings for the Vess R2000’s Management ports.
Each Management Port can be configured:
•
“Making Virtual Management Port Settings (CLU)” on page 464
•
“Making Maintenance Mode Settings (CLU)” on page 466
M
akiNg
V
irtual
M
aNageMeNt
p
ort
s
ettiNgs
(Clu)
The Vess R2000 subsystem has a virtual management port, enabling you to log into a Vess R2000 with dual
controllers using one IP address.
Before you change settings, please see "About IP Addresses" on page 110.
You initially made these settings during subsystem setup. You can change them later as required.
Caution
Changing virtual management port settings can interrupt your network connection
and require you to log in again.
M
Aking
A
utOMAtic
s
ettings
Automatic settings require a DHCP server on your network. DHCP is currently supported on IPv4 only.
To enable automatic management port settings:
1. From the Main Menu, highlight
Network Management
and press
Enter
.
2. Highlight the protocol family (IPv4 or IPv6) you want and press
Enter
.
3. Highlight
Network Settings
and press
Enter
.
4. Highlight
DHCP
and press the spacebar to toggle to
Enabled
.
5. Press
Control-A
to save your settings.