Promise Technology 2-Year Extended Warranty for VessR2000 RAID Head - Manual (Page 329)

302
Vess R2000 Series Product Manual Promise Technologies
Table of Supported Commands (Continued)
Command Action
lunmap
View the LUN mapping and masking table. Enable or disable LUN mapping
and masking on Fibre Channel host interface product. Add, delete or modify
an LMM entry.
logdrv
View or edit logical drive information and settings. Locate a logical drive via
LEDs.
logout Logout session for the current user.
maintenance Enter or exit maintenance mode.
migrate Start and monitor disk array migration process.
mp
View media patrol status and progress. Start, stop, pause, or resume media
patrol.
net View or edit Ethernet network information and settings.
ntp View or edit NTP status and settings.
password Modify a user’s password.
pdm
View PDM status and progress. Start, stop, pause, or resume PDM
process.
perfstats
Start and view performance statistics for controllers, logical drives, physical
drives or ports.
phydrv
View or edit physical drive information and settings. Locate a physical drive
via LEDs.
ping Ping another system through management port.
ptiflash Update system software and firmware through tftp server.
rc
View redundancy check status and progress. Start, stop, pause or resume
redundancy check.
rb
View rebuild status and progress. Start, stop, pause, or resume a rebuild
process.
Note : Commands are NOT case sensitive.