Promise Technology 2-Year Extended Warranty for VessR2000 RAID Head - Manual (Page 482)

455
Product Manual Manage with CLU
5. Highlight the following parameters and press the backspace key to erase the current value:
• Alias – Type an alias into the field, if desired. Maximum of 32 characters.
Use letters, numbers, space between words and underscore.
• RAID Level - Press the spacebar to toggle though a list of available RAID levels.
• Capacity – Maximum capacity shown. Enter a smaller capacity if desired.
6. Highlight the following parameters and press the spacebar to toggle though the available choices:
• Stripe size – Press the spacebar to choose: 64 KB, 128 KB, 256 KB, 512 KB, or 1 MB.
• Sector size – Press the spacebar to choose: 512 B; 1 KB, 2 KB, or 4 KB.
• Write Policy – Press spacebar to choose: Write Back or Write Through.
• Read Policy – Press spacebar to choose: No Cache, Read Cache, or Read Ahead Cache.
7. Highlight P referred Controller ID and press the spacebar to toggle among 1 , 2 , or Automatic .
8. Highlight PerfectRebuild and press the spacebar to toggle Enable or disable.
9. RAID 30, 50 and 60 only. Highlight Number of Axles and press the spacebar to choose the number of
axles.
10. Highlight Save Logical Drive and press Enter .
Note
If you did not use all of the available capacity of the disk array, you can
create an additional logical drive at this point.