Promise Technology 2-Year Extended Warranty for VessR2000 RAID Head - Manual (Page 428)

401
Product Manual Managing with the CLI
lacp This mode is known as Dynamic Link Aggregation mode. It creates
aggregation groups that share the same speed and duplex
settings. This mode requires a switch that supports IEEE 802.3ad
Dynamic link.
transit
Usage
transit [-a ] [-d ] [-s ]
transit -a start -d -s -p
transit -a stop -d -s
transit -a pause -d -s
transit -a resume -d -s
Summary
The transit command starts, stops, pauses, and resumes a transition and monitors the
progress of a running transition.
Transition is an operation to replace a revertible spare drive currently used in a disk array
with an new physical drive, so the reveritible spare can be restored to spare drive status.
The destination drive can be an unconfigured drive, a non- revertible global spare, or a non-
revertible spare dedicated to the array.
Examples
trunk -a add -s”ctrlid=1,masterport=2,slaveport=3 4”
trunk -a del -i 2