Viewing fibre channel logged-in devices (clu), Making fibre channel port settings (clu), Iewing – Promise Technology 2-Year Extended Warranty for VessR2000 RAID Head User Manual
Page 495: Ibre, Hannel, Ogged, Evices, Clu) 468, Aking, Ettings
468
Vess R2000 Series Product Manual
Promise Technologies
V
iewiNg
F
ibre
C
haNNel
l
ogged
-
iN
d
eViCes
(Clu)
To view a list of logged-in devices:
1. From the Main Menu, highlight
Fibre Channel Management
and press
Enter
.
2. Highlight
Fibre Channel Ports
and press
Enter
.
3. Highlight the port you want and press
Enter
.
4. Highlight
Logged In Devices
and press
Enter
.
If a Fibre Channel switch is attached, it also appears in this list.
M
akiNg
F
ibre
C
haNNel
p
ort
s
ettiNgs
(Clu)
To make Fibre Channel port settings:
1. From the Main Menu, highlight
Fibre Channel Management
and press
Enter
.
2. Highlight
Fibre Channel Ports
and press
Enter
.
3. Highlight the port you want and press
Enter
.
4. Highlight
Fibre Channel Port Settings
and press
Enter
.
5. Highlight the following parameters and press the spacebar to toggle though the choices:
• Configured Link Speed
– 8 Gb/s, 4 Gb/s, 2 Gb/s, or Automatic selection
• Configured Topology
– NL-Port (Arbitrated Loop), N-Port
(Point to Point) or Automatic selection
6. Highlight
Hard ALPA
and press the backspace key to erase the current value, then type the new value.
The range is 0 to 255. 255 disables this feature.
7. Press
Control-A
to save your settings.