Making maintenance mode settings (clu), Making automatic settings, Making manual settings – Promise Technology 2-Year Extended Warranty for VessR2000 RAID Head User Manual
Page 493: Aking, Aintenance, Ettings, Clu), Utomatic, Anual

466
Vess R2000 Series Product Manual
Promise Technologies
M
akiNg
M
aiNteNaNCe
M
ode
s
ettiNgs
(Clu)
Each controller has its own IP addresses for access when the controller goes into maintenance mode. For more
information, see "Maintenance Mode" on page 112.
Before you change settings, please see “About IP Addresses” on page 36.
M
Aking
A
utOMAtic
s
ettings
1. From the Main Menu, highlight
Network Management
and press
Enter
.
2. Highlight
Maintenance Mode Network Configuration
and press
Enter
.
3. Highlight the controller (CId 1 or 2) and protocol family (IPv4 or IPv6) you want and press
Enter
.
4. Highlight
DHCP
and press the spacebar to toggle to
Enabled
.
5. Press
Control-A
to save your settings.
M
Aking
M
AnuAl
s
ettings
1. From the Main Menu, highlight
Network Management
and press
Enter
.
2. Highlight
Maintenance Mode Network Configuration
and press
Enter
.
3. Highlight the controller (CId 1 or 2) and protocol family (IPv4 or IPv6) you want and press
Enter
.
4. Highlight
DHCP
and press the spacebar to toggle to
Disabled
.
5. Highlight each of the following and press the backspace key to erase the current value, then type the new
value.
•
IP Address
•
Subnet Mask
•
Default Gateway IP Address
•
DNS Server IP Address
6. Press
Control-A
to save your settings.