Promise Technology 2-Year Extended Warranty for VessR2000 RAID Head - Manual (Page 554)

527
Product Manual Manage with CLU
R
eStARtIng the
S
uBSySteM
There are two methods for restarting the subsystem. Choose one of the following procedures:
• “Restarting the enclosure - Telnet Connection” on page 527
• “Restarting the enclosure – SSH Connection” on page 528
• “Restarting the enclosure – Serial Connection” on page 528
Note
If you have a JBOD Expansion, you are not required to restart the JBOD
subsystems when you restart the RAID subsystem.
r
estartiNg the eNClosure
- t
elNet
C
oNNeCtioN
To restart the RAID subsystem:
1. From the Main Menu, highlight Additional Info and Management and press Enter .
2. Highlight Shutdown or Restart and press Enter .
3. Highlight Option and press the spacebar to display Restart .
4. Highlight Submit and press Enter .
A warning message appears.
5. Press Y to continue.
The screen goes blank.
6. Wait about two minutes.
7. Re-establish your Telnet connection to the Vess R2000 CLU.
If you cannot re-establish a connection, wait 30 seconds and try again.