Promise Technology 2-Year Extended Warranty for VessR2000 RAID Head - Manual (Page 137)

110
Vess R2000 Series Product Manual Promise Technologies
s
huttiNg
d
owN the
s
ubsysteM
This function shuts down the RAID subsystem without restarting it.
To shutdown the subsystem:
1. Click the Administration tab.
2. Click the Subsystem Information icon.
3. Choose the option to apply the shutdown to the Subsystem , Controller 1 only or Controller 2 only
4. Click the Shutdown/Restart button.
5. Click the Shutdown button.
6. Type the word “ confirm ” in the field provided.
7. Click the Confirm button.
When the controller shuts down, your WebPAM PROe connection is lost.
8. Wait at least two minutes.
Important
If your RAID subsystem manages JBOD expansion units, you must follow
the proper startup procedure.
r
estartiNg the
s
ubsysteM aFter a
s
hutdowN
To start the RAID subsystem:
1. Press the Power button on the front left side of the device being restarted.
2. Wait at least two minutes.
3. Open your browser and log into WebPAM PROe.
If you cannot log in immediately, wait 30 seconds and try again.