Starting up the enclosure – serial connection, Tarting, Enclosure – Promise Technology 2-Year Extended Warranty for VessR2000 RAID Head User Manual
Page 553: Erial, Onnection
526
Vess R2000 Series Product Manual
Promise Technologies
s
tartiNg
up
the
eNClosure
– s
erial
C
oNNeCtioN
Important
If you have a JBOD Expansion, always power on the JBOD subsystems first. Then
power on the RAID subsystem.
To start the RAID subsystem:
1. Manually turn on the system by pressing the power button on the front left side
2. Wait about two minutes
3. Establish a serial connection to the Vess R2000.
See “Making a Serial Connection” on page 410.
When the Login: prompt appears, the start up is finished.
4. Type
menu
and press
Enter
to open the CLU.