Promise Technology 2-Year Extended Warranty for VessR2000 RAID Head - Manual (Page 390)

363
Product Manual Managing with the CLI
net
Usage
net [-a ] [-f ] [-m] [-v]
net -a mod [-f ] [-m]
-s “”
Summary
Net is used to display the TCP/IP specific information for the management port.
In addition to displaying IP address and subnet mask, changes to DHCP and DNS settings
can be changed. Most often this command will be used during initial setup to either setup a
static IP address or to display what DHCP assigned IP address the enclosure is using.
Options
-a Which action to perform.
list (Default) Displays a list of IP configurations.
mod To modify current network settings.
enable To enable IPv4/IPv6.
disable To disable IPv4/IPv6.
-m Maintenance mode.
-c Specifies the controller ID. When the action is to modify setting
and -c is not specified, the value is default to be the current
controller id. Used with -m maintenance mode.
-f To specify which protocol family will be modified, enabled or
disabled.
ipv4 (Default)IPv4.
ipv6 IPv6.