Promise Technology 2-Year Extended Warranty for VessR2000 RAID Head - Manual (Page 475)

448
Vess R2000 Series Product Manual Promise Technologies
p
repariNg the
d
isk
a
rray For
t
raNsport
(Clu)
To run the Transport function on a disk array:
1. From the Main Menu, highlight Disk Array Management and press Enter .
2. Highlight the disk array you want and press Enter .
3. Highlight Transport and press Enter .
4. Press Y to confirm.
r
ebuildiNg a
d
isk
a
rray
(Clu)
Before you can rebuild, you must have a replacement or target physical drive of adequate capacity for your
disk array.
To rebuild a disk array:
1. From the Main Menu, highlight Disk Array Management and press Enter .
2. Highlight the disk array you want and press Enter .
3. Highlight Background Activities and press Enter .
4. Highlight Rebuild and press Enter .
Default source and target drives are shown with possible alternative choices.
5. To choose different drive, highlight the drive, press the backspace key to remove the current number,
then type a new number.
6. Highlight Start and press Enter .
For rebuild rate, see “Making Background Activity Settings” on page 494.
r
uNNiNg
M
edia
p
atrol oN a
d
isk
a
rray
(Clu)
Media Patrol is a routine maintenance procedure that checks the magnetic media on each disk drive. If Media
Patrol encounters a critical error, it triggers PDM if PDM is enabled on the disk array.
See “Enabling Media Patrol, PDM, Power Management - Disk Array (CLU)” on page 447 .
For Media Patrol rate, see “Making Background Activity Settings” on page 494.