Promise Technology 2-Year Extended Warranty for VessR2000 RAID Head - Manual (Page 559)

532
Vess R2000 Series Product Manual Promise Technologies
during the firmware update. Updates with this option take a longer period of time to complete. All Vess
R2600 models support this feature.
6. Click the Next button.
The next screen shows the Flash Image (firmware image file) Version Number and Build Date.
7. Click the Submit button.
8. In the Confirmation box, type the word “ confirm ” in the field provided and click the Confirm
button.
The progress of the update displays.
When the update is completed a message tells you to reboot the subsystem,
9. Click the OK button.
• If you chose the Disruptive Flash Method, the RAID subsystem
and JBOD expansion units automatically restart.
• If you chose the Non-Disruptive Flash Method, the system automatically
flashes and restarts the RAID controllers one at a time.
A
utOMAtic
r
estArt
If you did NOT check the NDIU box, the RAID subsystem and JBOD expansion units automatically restart. That
action temporarily disrupts I/O operations and drops your WebPAM PROe connection.
To reestablish your WebPAM PROe connection:
1. Wait no less than two minutes.
2. Click Logout in the WebPAM PROe Header, then log in again.
If you cannot log in, wait 30 seconds and try again.
3. In your browser, click Logout in the WebPAM PROe Header, then log in again.
If you cannot log in immediately, wait 30 seconds and try again.
Warning
Do NOT power off the RAID subsystem during the update!
Do NOT move to any other screen until the firmware update operation is
completed!