Promise Technology 2-Year Extended Warranty for VessR2000 RAID Head - Manual (Page 663)

636
Vess R2000 Series Product Manual Promise Technologies
If a physical drive fails during a transport, or you do not move all of the physical drives to their new locations,
WebPAM PROe displays an incomplete array. When WebPAM PROe discovers an incomplete array, it displays a
dialog box asking you to:
• Click the OK button to accept the incomplete array.
• Click the Cancel button to reject the incomplete array.
Accepting an Incomplete Array
Before you accept the incomplete array, be sure all of the physical drives are present and that their drive
carriers are properly installed into the enclosure. See “Installing Your Drives” on page 36.
If you choose to accept the incomplete array:
1. Click OK in the incomplete array dialog box.
2. Check the operational status of the logical drives in the array.
• If the logical drives are Critical, proceed with a rebuild.
• If the logical drives are Offline, contact Technical Support. See
“Contacting Technical Support” on page 665.
3. Restore your data from a backup source.
If you choose NOT to accept the incomplete array:
1. Click Cancel in the incomplete array dialog box.
2. Do one of the following:
• Delete the array. This action deletes all logical drives on the array.
• Replace the missing physical drive.