Promise Technology 2-Year Extended Warranty for VessR2000 RAID Head - Manual (Page 338)

311
Product Manual Managing with the CLI
with the -a list option. For example ‘array -a list -c3’ will give a
summary for the first 3 arrays on that controller.
Also specifies the number of logical drives to be created when
used with the -a add option. If this -c option is used, all the logical
drives will be created with the same settings and only one -l can
be specified.
-t Specify the type of incomplete condition to accept. If not specified,
it will accept the current incomplete condition by default.
missingdrive The condition of missing drive in the array.
missingwatermark The condition of missing NVRAM watermark of the array.
-v Verbose mode. Used with -a list to display all properties of the
given array.
Examples
array -v -c 1
array -a add -s “alias=MyArray,mediapatrol=enable” -p 1,3,5~9
-l “raid=5,capacity=50gb,stripe=256kb,sector=1kb”
array -a add -p 1,3,5~9 -l “raid=5,capacity=50gb,stripe=256kb”
-l “raid=0,capacity=100gb”
array -a mod -d 1 -s “alias=YourArray,mediapatrol=disable”
array -a del -d 3
array -a locate -d 0
array -a accept -d 2
array -a addld -d 0 -l “raid=1e,capacity=125gb,stripe=64kb”
array -a delld -l 1