Adding a lun map, Dding, Lun m – Promise Technology 2-Year Extended Warranty for VessR2000 RAID Head User Manual
Page 250

223
Product Manual
WebPAM PROe - System Configuration
a
ddiNg
a
luN M
ap
For FC systems or iSCSI systems, you can set up an Initiator LUN map.
A maximum of 256 logical drives can be mapped to an FC initiator or an iSCSI initiator.
To assign a LUN to an initiator, add the initiator first. See
“Adding an FC Initiator” on page 219 or “Adding an
LUN masking must be enabled in order to map a LUN. See “Enabling and Disabling LUN Masking” on page
To add a LUN map:
1. Click the
Storage
tab.
2. Click the
LUN Mapping & Masking
icon.
3. Beside Active
LUN Mapping Type,
• FC subsystems, choose the
Initiator
option.
• iSCSI subsystems, choose the
Initiator
option.
If you change the LUN Mapping Type, in the popup message type “
confirm
” and click the
Confirm
button.
4. Click the
LUN Mapping
button.
The first LUN Mapping screen appears.
This screen lets you choose initiators, ports, or targets, depending on the Active LUN Mapping Type.
5.
Click the drop-down menu to choose the initiators, ports, or targets you want for the LUN map.
Choose your initiators, ports, or targets individually or choose all of them.
6. Click the
Next
button.
The second LUN Mapping screen appears.