Promise Technology 2-Year Extended Warranty for VessR2000 RAID Head - Manual (Page 346)

319
Product Manual Managing with the CLI
-t Specifies what type of scheduler.
mp Media Patrol Schedule.
rc Redundancy Check Schedule.
br Battery Reconditioning Schedule.
sc Spare Drive Check Schedule.
-i Specifies the RC scheduler ID.
It’s used for list/modify/delete RC scheduler. If the option is not specified, assumed to all.
-s “=” Used to specify which BGA scheduler settings to change.
status= Specifies status type of scheduler.
enable Enable a scheduler.
disable Disable a scheduler. The default is disable.
starttime= Used to specify start time of scheduler in the following format
hh:mm where hour’s range is 0-23, minute’s range are 0-59.
The default is 20:00 for MP, 22:00 for RC and SC, 02:00 for others.
recurtype= Specifies recurrence type of scheduler.
daily
weekly The default is weekly.
monthly
recurInterval= Specifies recurrence Interval.
This option is for Daily and Weekly recurrence type.
For Daily type, the range is 1-255. (default is 1)
For Weekly type, the range is 1-52.
For Weekly type, the default is 4 for MP, 2 for RC,1 for others.
dow= Day of Week. This is for Weekly or Monthly recurrence type
scheduler.
Examples
bga
bga -a mod -s “autorebuild=enable,rebuildrate=high,syncrate=low”