Making maintenance mode settings, Aking, Aintenance – Promise Technology 2-Year Extended Warranty for VessR2000 RAID Head User Manual
Page 162: Ettings
135
Product Manual
WebPAM PROe - System Configuration
M
akiNg
M
aiNteNaNCe
M
ode
s
ettiNgs
Each controller has its own IP addresses for access when the controller goes into maintenance mode.
Before you change settings, please See
“About IP Addresses” on page 67.
To make maintenance mode settings:
1. Click the
Administration
tab.
2. Click the
Network Management
icon.
3. Click the
Maintenance Mode
tab.
4. Click the controller and protocol family whose settings you want to change and click the
Configuration
button.
5. Make the following settings are needed:
• Check the
Enable
box
to enable this protocol family.
• Check the
Enable DHCP
box to enable a DHCP server to make your
network settings. DHCP is currently supported in IPv4 only.
• For manual network settings, type the
IP address, subnet mask, gateway
IP address
, and
DNS server IP address
into the fields provided.
6. Click the
Submit
button.