Promise Technology 2-Year Extended Warranty for VessR2000 RAID Head - Manual (Page 112)

a
utoMatiC
C
oNFiguratioN
When you choose the Automatic option, the following parameters appear on the screen:
• Disk Arrays – The number of logical drives, number of physical drives, ID of each physical drive,
configurable capacity, and the media type (hard disk drives or solid state drives).
• Logical Drives – The ID numbers of the logical drives, their RAID levels, capacity, sector size, and stripe
size.
• Spare Drives – The ID numbers of the logical drives, type (global or dedicated) revertible option (enabled
or disabled) and media type. A hot spare drive is created for all RAID levels except RAID 0, when five or
more unconfigured physical drives are available
If you do NOT accept these parameters, use the Express or Advanced option to create your disk array.
If you accept these parameters, click the Submit button, and then click the Finish button.
The new disk array appears in the Disk Array List on the Storage tab, Disk Array option.
Automatic configuration menu
85
Product Manual Setup