Promise Technology 2-Year Extended Warranty for VessR2000 RAID Head - Manual (Page 276)

249
Product Manual WebPAM PROe - System Configuration
p
iNgiNg a
h
ost or
s
erVer oN the i
sCsi N
etwork
This function enables you to ping other network nodes through any one of the Vess R2600’s iSCSI ports.
To ping a host or server on the network:
1. Click the Device tab.
2. Click the IO Network Management icon.
3. Click the Ping tab.
4. Type the IP address of the host or server into the IP Address field.
5. Choose the port Type from the drop-down menu.
• iSCSI means an iSCSI port
• Mgmt means the Vess R2600’s virtual management port
6. If you chose iSCSI port, choose the RAID controller and port number from the drop-down menus.
7. Type the number of packets you want to send in the Number of Packets to Ping field.
Four packets are commonly used for a ping.
8. Click the Start button.
In a few moments, the result displays under the Device tab as Ping succeeded or Ping failed .