Starting up after shutdown, Starting up the enclosure – telnet connection, Starting up the enclosure – ssh connection – Promise Technology 2-Year Extended Warranty for VessR2000 RAID Head User Manual
Page 552: Tarting, Fter, Hutdown, Enclosure, Elnet, Onnection, Ssh c

525
Product Manual
S
tARtIng
u
P
A
fteR
S
hutDown
There are two methods for shutting down the subsystem. Choose one of the following procedures:
•
“Starting up the enclosure – Telnet Connection” on page 525
•
“Starting up the enclosure – SSH Connection” on page 525
•
“Starting up the enclosure – Serial Connection” on page 526
s
tartiNg
up
the
eNClosure
– t
elNet
C
oNNeCtioN
To start the RAID subsystem:
1. Manually turn on the system by pressing the power button on the front left side.
2. Wait about two minutes.
3. Establish a Telnet connection to the Vess R2000.
If you cannot log in, wait 30 seconds and try again.
4. Type
menu
and press
Enter
to open the CLU.
s
tartiNg
up
the
eNClosure
– ssh C
oNNeCtioN
To start the RAID subsystem:
1. Manually turn on the system by pressing the power button on the front left side.
2. Wait about two minutes.
3. Establish a SSH connection to the Vess R2000.
See Making a SSH Connection.
If you cannot log in, wait 30 seconds and try again.
4. Type
menu
and press
Enter
to open the CLU.