Promise Technology 2-Year Extended Warranty for VessR2000 RAID Head - Manual (Page 264)

237
Product Manual WebPAM PROe - System Configuration
M
akiNg i
sCsi p
ortal
s
ettiNgs
To make iSCSI portal settings:
1. Click the Device tab.
2. Click the IO Network Management icon.
3. Click the Portal tab.
4. Click the portal you want, then click the Settings button.
5. Make settings changes as needed:
• If you have a Trunk association, choose a Trunk ID (1 to 8) from the drop-down menu.
• Type the IP address of the portal in the field provided.
• Type the subnet mask of the portal in the field provided.
• If you have a
VLAN association, enter a VLAN tag (1 to 4094) in the field provided.
• From the IP Type drop-down menu, choose IPv4 or IPv6.
DHCP is currently supported only for IPv4.
6. Click the Submit button.
d
eletiNg i
sCsi p
ortals
To delete an iSCSI portal:
1. Click the Device tab.
2. Click the IO Network Management icon.
3. Click the Portal tab.
4. Click the portal you want, then click the Delete button.
5. In the Confirmation box, type the word “ confirm ” in the field provided and click the Confirm
button.
The portal is removed from the list.