Promise Technology 2-Year Extended Warranty for VessR2000 RAID Head - Manual (Page 503)

476
Vess R2000 Series Product Manual Promise Technologies
• Enable NOP-In - Enable to check iSCSI connection status
6. Highlight Save Settings and press Enter .
7. Press Return to Previous Menu to return to the iSCSI targets list.
V
iewiNg a
l
ist oF i
sCsi p
orts
(Clu)
An iSCSI port is the physical iSCSI connection on the Vess R2000. There are four iSCSI ports on each RAID
controller for a total of eight per subsystem.
To view a list of iSCSI ports:
1. From the Main Menu, highlight iSCSI Management and press Enter .
2. Highlight iSCSI Ports and press Enter .
The list of ports appears with controller and port numbers.
V
iewiNg i
sCsi p
ort
i
NForMatioN
(Clu)
To view information for an iSCSI target port:
1. From the Main Menu, highlight iSCSI Management and press Enter .
2. Highlight iSCSI Ports and press Enter .
The list of ports appears with controller and port numbers.
3. Highlight the port you want to see and press Enter .
The target port information screen displays. Information includes:
• CtrlId – Controller ID (1 or 2)
• JumboFrame – Jumbo frames, enabled or disabled*
• LinkStatus – Link status, up or down, Active or Inactive
• MACAddress – MAC address of the target port
• MaxSupportedSpeed – Maximum speed supported (1 Gb/s or 10 Gb/s)
• CurrentSpeed – Current or actual speed of the target port
• RelativePortals – The portals corresponding to this target port
Items marked with an asterisk (*) are adjustable under “Making iSCSI Port Settings” below.